FILTER BY
Aluminum Side Handle Batons – Fixed Handle
The 1311 Series baton is made of aircraft grade aluminum tubing that will not bend, warp or break, even when exposed to extreme hot or cold temperatures. The finish is black anodize providing a durable high-quality finish that is corrosion and abrasion resistant. The aluminum tubing is filled with a wood dowel to protect the user’s hand from impact vibration and shock. The end caps are smooth and permanently pressed into place to avoid unnecessary injury.The “short end” of the baton is also used as a second handle. Rubber sleeves or grips may be added to improve the grip on the short end of the baton. The aluminum batons can also be knurled to improve grip. This model features a plastic handle that is injection molded around an aluminum insert. The aluminum insert is threaded on one end and contoured to properly fit against the body of the baton. Standard 5/16 x 2 inch Allen screw is used to assemble the handle to the baton. This handle assembly will remain tight against the baton and can be easily removed if it becomes necessary using the standard hex Allen wrench furnished with each baton.
Aluminum Side Handle Batons – Spin Handle
The 1211 Series features a machined aluminum handle with a patented “rotating” bushing built into the base or bottom portion that is not obviously visible when the handle is assembled. The rotating bushing improves control along with increasing baton speed. The baton can be very effective even when wearing gloves. The “short end” of the baton is also used as a second handle. Rubber sleeves or grips may be added to improve the grip on the short end of the baton. The baton is made of aircraft grade aluminum tubing that will not bend, warp or break, even when exposed to extreme hot or cold temperatures. The finish is black anodize providing a durable high-quality finish that is corrosion and abrasion resistant. The aluminum tubing is filled with a wood dowel to protect the user’s hand from impact vibration and shock. The end caps are smooth and permanently pressed into place to prevent unnecessary injury. The handle is also machined aluminum with a plastic rotating bushing built into the handle. A standard hex Allen wrench is included if it becomes necessary to remove the handle for cleaning.
Aluminum Straight Batons
The 1111 Series aluminum batons are the most durable baton available. Made of aircraft grade aluminum tubing with a durable black anodize finish. These batons are smooth on both ends and the hand grip accessories such as the rubber sleeves and roll on grips greatly improve the users ability to grip the baton. The aluminum also allows for a milled knurled hand grip milled into the aluminum on one end or both ends as required. The baton stop accessory is used to support the baton in the belt/ring carrier.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum
baton was developed to minimize that possibility. Consider your application,
department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.
Baton Accessories
1. SIDE HANDLE BATON MANUAL
2. RUBBER SLEEVE GRIP
The rubber slide on sleeve results in a slightly larger grip when installed on any baton that is 1 ¼ inch in diameter and made of wood, plastic or aluminum. Open on both ends.
3. ROLL ON RUBBER GRIP
The rubber roll on grip is an easy way to improve the grip on any baton that is 1 ¼ inch in diameter and made of wood, plastic or aluminum. Closed on one end.
4. SIDE HANDLE GROMMET
The handle grommet can be easily positioned at the top of the handle by pushing the grommet over the end of the handle resulting in a larger diameter at the end of the handle. Designed to improve gripping especially when using the fixed handle model baton. Also known as “Trumble Stop”.
5. TAPER GROMMET
The taper grommet is a baton stop that supports the baton in the belt carry ring. Taper grommet fits all 1 ¼ inch diameter batons that are made of wood, plastic or aluminum.
6. RUBBER BATON CLAMPS
These black flexible rubber auto clams are very popular for mounting batons in vehicles. They are sold by the pair. The clamps are durable, will not tear clothing and fit all batons.
Hardwood Straight Batons
The Aetco straight wood baton features second growth hickory having a clear straight grain with no knots or imperfections. All wood batons are 1 ¼ inch diameter and come in standard lengths from 24 to 42 inches in length. Wood batons are vat dyed and finished using a durable hard lacquer finish. These batons are smooth on both ends and the hand grip accessories such as the rubber sleeves and roll on grips greatly improve the user’s ability to grip the baton. The baton stop accessory is used to support the baton in the beltor ring carrier. A leather thong may also be added to this model baton and should be ordered in include the drilled thong hole.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum baton was developed to minimize that possibility. Consider your application, department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.
Kubaton
Polymer Side Handle Batons-Fixed Handle
The 1321 Series baton is made of solid black acetate plastic material. The ends are rounded and smooth to prevent unnecessary injury. This series features a plastic handle that is injection molded around an aluminum insert. The aluminum insert is threaded on one end and contoured to properly fit against the body of the baton. Standard 5/16 x 2 inch Allen screw is used to assemble the handle to the baton. This handle assembly will remain tight against the baton and the handle can be easily removed if it becomes necessary using a standard hex Allen wrench furnished with each baton. The “short end” of the baton is also used as a second handle. Rubber sleeves or grips may be added to improve the grip on the short end of the baton. This model features a plastic handle that is injection molded around an aluminum insert. The aluminum insert is threaded on one end and contoured to properly fit against the body of the baton. Standard 5/16 x 2 inch Allen screw is used to assemble the handle to the baton.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum baton was developed to minimize that possibility. Consider your application, department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.
Polymer Side Handle Batons-Spin Handle
The 1221 Series features a machined aluminum handle with a patented “rotating” bushing built into the base or bottom portion that is not obviously visible when the handle is assembled. The rotating bushing improves control along with increasing baton speed. The baton can be very effective even when wearing gloves. The “short end” of the baton is also used as a second handle. Rubber sleeves or grips may be added to improve the grip on the short end of the baton. The baton is made of a solid black acetate plastic material and the ends are rounded and smooth to prevent unnecessary injury. The handle is machined aluminum with a plastic rotating bushing. A standard hex Allen wrench is included if it becomes necessary to remove the handle for cleaning.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum baton was developed to minimize that possibility. Consider your application, department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.
Polymer Straight Batons
The 1121 Series of plastic batons features a polished black acetate solid plastic rod, 1.25 inches in diameter with the ends rounded and polished finish to avoid unnecessary injury. These batons are smooth on both ends and the hand grip accessories such as the rubber sleeves and roll on grips greatly improve the users ability to grip the baton. The baton stop accessory is used to support the baton on the belt/ring carrier. A leather thong may also be added to this model baton and should be ordered to include the drilled thone hole.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum baton was developed to minimize that possibility. Consider your application, department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.
Polymer Straight Batons Grenade Grip
The 1122 Series plastic batons features a “grenade hand grip” milled into the polished black acetate plastic rod. The baton is 1.25 inches in diameter with the ends rounded and smooth to avoid unnecessary injury. The grenade grip is a two step pattern process, an option on the grenade grip would be to eliminate the fluting pattern creating a ring pattern option. The baton stop accessory is used to support the baton in the belt/ring carrier. A leather thong may also be added to this model baton and should be ordered to include the drilling thong hole.
CAUTION: All plastic and wood batons are subject to breaking. The aluminum baton was developed to minimize that possibility. Consider your application, department policy and severity of usage with the options you have available. Please consult the factory if you have any questions.